وحید زال قلقاچی
استادیار مهندسی مکانیک - ساخت و تولید
دانشگاه صنعتی قم
تاریخ تولد: 1367/01/01
آدرس ایمیل: zal@qut.ac.ir و Vahid.zal88@gmail.com
سوابق تحصیلی
|
دانشگاه تبریز، 1/7/1385 تا 31/6/1389 |
کارشناسی مهندسی مکانیک – ساخت و تولید |
|
معدل: 17.73 |
|
|
پروژه نهایی: طراحی و ساخت دینامومتر تراشکاری |
|
|
دانشگاه تهران، 1/7/1389 تا 29/6/1391 |
کارشناسی ارشد مهندسی مکانیک – ساخت و تولید |
|
معدل: 18.08 |
|
|
پایاننامه: آنالیز تجربی و عددی و بهینه سازی تنش های پسماند در فرایند هیدروفورمینگ لوله (دفاع با نمره 19.79) |
|
|
دانشگاه تربیت مدرس، 1/7/1391 تا 17/8/1395 |
دکتری تخصصی (PhD) مهندسی مکانیک – ساخت و تولید |
|
معدل: 17.69 |
|
|
رساله: آنالیز تجربی و عددی شکل دهی غلتکی ورق های کامپوزیتی شیشه/آلومینیوم/ پیویسی به پروفیل ناودانی متقارن (دفاع با نمره 20) |
|
|
دانشگاه دلفت هلند - دانشکده هوا و فضا |
دوره فرصت مطالعاتی |
|
شهریور 95 تا اسفند 95 |
سوابق دانشگاهی
|
دانشگاه صنعتی قم – دانشکده مهندسی مکانیک |
استادیار – دانشکده مهندسی مکانیک - ساخت و تولید |
|
از تاریخ 01/03/1400 تا به امروز |
|
|
تدریس دروس مکانیک و ساخت و تولید برای مقاطع کارشناسی و کارشناسی ارشد، پژوهش در زمینه مواد کامپوزیتی |
|
|
دانشگاه کرنفیلد انگلیس |
پژوهشگر پستداک (Research fellow) |
|
از تاریخ 25/05/1398 تا 01/03/1400 |
|
|
پژوهش در زمینه تقویت مواد کامپوزیتی |
سوابق پژوهشی
A. Sadooghi, J. Hashemi, V. Zal, et al., Advancing Mechanical Properties of Polypropylene Matrix Composites: Analysis of Diverse Reinforcing Fillers, Polymers for Advanced Technologies, 2025.
S. Mirzamohammadi, J. Hashemi, V. Zal, Modification of nanoparticle absorption using Sodium dodecyl sulfate addition in composite plating bath, Journal of Engineering and Applied Research, 2024.
V. Zal, H. Talebi, S. Mirzamohammadi, Investigating the effect of polyurethane foam filling on the energy absorption of hybrid tubes with different thickness of composite layer, Iranian Journal of Manufacturing Engineering, 2024.
V. Zal, H. Moslemi Naeini, et al., An Experimental Investigation on the Laser Forming of Aluminum/Epoxy/Glass FMLs, Lasers in Manufacturing and Materials Processing, 2024.
V. Zal, M. Habibi, Amir H. Jafari, Developing a New Manufacturing Method; and Numerical and Experimental Investigation of Buckling Behavior of Cylindrical Fish Cell Metastructure, Karafan Journal, 2024.
V. Zal, H. Taherian, M. Yasaee, Investigating the effect of recycled irregular metallic particles embedment on the interlaminar strength of Polyamide based composites, Composite Interfaces, 2023.
V. Zal, H. Moslemi Naeini, et al., An Experimental Investigation on the Laser Forming of Aluminum/Epoxy/Glass FMLs, Lasers in Manufacturing and Materials Processing, 2024.
V. Zal, M. Habibi, H. Hsavior, Development of Innovative Manufacturing Techniques, Journal of Manufacturing Science and Engineering, 2024.
V. Zal, H. Moslemi Naeini, A. R. Bahramian, J. Sinke, Investigation and analysis of glass fabric/PVC composite laminates processing parameters, Sci. and Eng. of Composite Materials, 2018.
V. Zal, H. Moslemi Naeini, J. Shabzadeh, et al., Experimental analysis of mechanical properties of various polymer composites, Composite Structures, 2024.