جامعة قم الصناعيةQOM UNIVERSITY OF TECHNOLOGY

Dr. MAJID MOHAMMADI

Associate Professor of Energy Engineering

CONTACT

Tell: +98 25 36169841,        Email: m.mohammadi@qut.ac.ir; majidmohammadi88@yahoo.com 

 

EDUCATION

2012 - 2017
PhD. in Chemical Engineering/ Energy Engineering, Amirkabir University of Technology, Tehran, Iran. GPA: 18.00/ 20

Thesis Title: Energy, Exergy, and Economic Analysis of the Effect of Nanofluids on the Stability of Asphaltene Particles in Porous Media Flow for the Reduction of Formation Damage Using Solar Thermal Energy


2009 – 2011
M.Sc. in Chemical Engineering/ Gas Processing and Transmission, Amirkabir University of Technology, Tehran, Iran. GPA: 18.00/ 20

Thesis Title: Experimental Study of Asphaltene Adsorption on Carbonate Oil Reservoir Rock Surfaces: Thermodynamic, Energy, and Economic Analysis and the Influence of Various Parameters on Adsorption Capacity

 

RESEARCH INTERESTS

- Photovoltaic and Solar Thermal Systems

- Climate Change and CO2 Emissions

- Energy Conversion- Carbon Dioxide (CO2) Conversion to Highly Valuable Products

- Energy and Environmental

- The Energy, Exergy, Economic Analysis and Optimization of Processes

- Solar Desalination

- Feasibility Study and Economic Assessment for Processes

- Nanotechnology

- Petroleum and Gas

- Enhanced Oil Recovery (EOR)

- Microbial Desalination Cell (MDC) for Simultaneous Power Generation and Water Desalination

 

HONORS AND AWARDS

- Ranked 3th in the Graduated B.Sc. Students among 40, 2008.

- Ranked 17th in the National Scientific Olympiad for university students in chemical engineering in Iran, 2008.

- Ranked 7th amongst nearly 3000 participants in the University Entrance Exam for M.Sc. degree in Chemical Engineering, 2009.

- Rank 1 in the Graduated M.Sc. Students among 7, 2010.

- Get admission of Amirkabir University of Technology in PhD. as a privileged student., Tehran, Iran, 2012.

- Excellent Level in PhD Thesis, 2017.

 

COURSES TAUGHT


- Energy Auditing

- Engineering Thermodynamics

- Heat Transfer

- Introduction to Renewable Energy

- Oil and Gas Processing Engineering

- Special Topics in Energy Engineering

- Energy Economics

- Fluid Mechanics

- Environmental Impacts of Energy

- Process Control

- Energy Systems Analysis

- Technical English for Energy Engineering

- Mass Transfer

- Unit Operation

 

SOME RECENTLY PUBLISHED ARTICLES

1) Jalali, M., Mohammadi, M. & Heidary, H. (2027). Thermal and Economic Assessment of Cooling Technologies in a Combined Cycle Power Plant: A Case Study Bandar Abbas Hengam Power Plant. International Journal of Engineering, 40(2), 347–360.

2) Sedighi, M., Mohammadi, M., Ghasemi, M., & Sedighi, M. (2026). Analyzing the technical and economic aspects of industrial CO2 capture; a way forward for sustainable environment. Petroleum Science and Technology, 44(15), 2387-2420.

3) Cheraghi, K., Sedighi, M., & Mohammadi, M. (2026). Modeling and economic analysis of a hybrid renewable energy system for simultaneous production of power, freshwater, and chlor-alkali products in kish island. Journal of Renewable and New Energy, 13(2), 61-72.

4) Mohammadi, M., & Rezayat, M. M. (2026). Improving solar energy absorption efficiency: innovative design for parabolic trough collectors using elliptical structures. Journal of Renewable and New Energy, 13(2), 47-60.

5) Barati, M., Mohammadi, M., & Sedighi, M. (2026). Economic Feasibility and CO2 Emissions Analysis of Solar Parking Lot vs. Diesel Generator as Backup Power System: A Case Study. Journal of Energy Management and Technology, 10(2), 133-143.

6) Baghsheikhi, M., Shafiei, P., & Mohammadi, M. (2025). Energy, Exergy, and Exergoeconomic Analysis of a Combined Cycle Power Plant With Post‐Combustion CO2 Capture: A Case Study in Northern Iran. Energy Science & Engineering, 13(11), 5075-5092.

7) Aliabadi, Y., Asgari, O., Mohammadi, M., & Ghanbari, F. (2025). Sustainable solar energy potential using GIS-PVSOL: An integrated technical, economic, environmental and social analysis in Qazvin, Iran. Results in Engineering, 107088.

8) Karimi, Y., Mohammadi, M., & Baghsheikhi, M. (2025). Feasibility of Solar Energy Integration versus Diesel Generators for the University: A Comprehensive Approach Considering Energy, Exergy, and Economics. Iranica Journal of Energy and Environment, 16(2), 309-325.

9) Mohammadi, M. & Sedighi, M. (2025). Direct and Sustainable Production of Gasoline Fuel from CO2 and Hydrogen using CuO/ZSM-5 Hybrid Catalyst. Journal of Petroleum Research, 35(1404-1), 3–12.

10) Baghsheikhi, M., Haftlangi, P., & Mohammadi, M. (2025). Analytical and experimental comparison of various in-row cooling systems for data centers: An exergy, exergoeconomic, and economic analysis. Thermal Science and Engineering Progress, 57, 103086.

11) Baghsheikhi, M., & Mohammadi, M. (2023). Experimental investigation of the vapor-compression cooling system in a data center: energy and exergy analysis: M. Baghsheikhi, M. Mohammadi. Journal of Thermal Analysis and Calorimetry, 148(17), 9079-9097.

12) Mohammadi, M., Fazeli, F., & Baghsheikhi, M. (2024). Enhancing water desalination and power generation in microbial desalination cells: A comprehensive review of effective parameters and structural types for optimal performance. Journal of Power Sources, 602, 234267.

13) Mohammadi, M., Ghasemi, M., & Sedighi, M. (2024). Comparative study of energy production and treatment of municipal and dairy wastewater via microbial fuel cell technology: process evaluation towards optimization. Biomass Conversion and Biorefinery, 14(5), 6285-6298.

14) Mohammadi, M., Sedighi, M., Natarajan, R., Hassan, S. H. A., & Ghasemi, M. (2021). Microbial fuel cell for oilfield produced water treatment and reuse: Modelling and process optimization. Korean Journal of Chemical Engineering, 38(1), 72-80.

15) Sedighi, M., Mohammadi, M., Ameli, F., Amiri-Ramsheh, B., & Hemmati-Sarapardeh, A. (2025). A comparative study of machine learning frameworks for predicting CO2 conversion into light olefins. Fuel, 379, 133017.

16) Mohammadi, M., & Sedighi, M. (2023). Optimizing the CO2 conversion for the sustainable production of light olefins using Cu-ZnO-ZrO2/SAPO-34 bifunctional catalysts. Process Safety and Environmental Protection, 176, 605-617.

17) Sedighi, M., & Mohammadi, M. (2020). CO2 hydrogenation to light olefins over Cu-CeO2/SAPO-34 catalysts: Product distribution and optimization. Journal of CO2 Utilization, 35, 236-244.

18) Ghasemi, M., Mohammadi, M., & Sedighi, M. (2020). Sustainable production of light olefins from greenhouse gas CO2 over SAPO-34 supported modified cerium oxide. Microporous and Mesoporous Materials, 297, 110029.

19) Sedighi, M., Aljlil, S. A., Alsubei, M. D., Ghasemi, M., & Mohammadi, M. (2018). Performance optimisation of microbial fuel cell for wastewater treatment and sustainable clean energy generation using response surface methodology. Alexandria engineering journal, 57(4), 4243-4253.


BOOKS


1) Mohammadi, M. & Sedighi, M. (2025). Unit Operations in Process Industries. Qom University Press, Qom, Iran.

2) Ahmadi, Y., Mohammadi, M., & Sedighi, M. (2022). Introduction to chemical enhanced oil recovery. In Chemical Methods (pp. 1-32). Elsevier.

3) Khoshsima, A., Sedighi, M., & Mohammadi, M. (2023). Enhanced oil recovery by water alternating gas injection. In Gas Injection Methods (pp. 295-316). Elsevier.

4) Sedighi, M., Aminian, M., Mohammadi, M., & Koohi, A. D. (2023). Overview of thermal concepts in enhanced oil recovery. In Thermal methods (pp. 1-45). Elsevier.

5) Mohammadi, M., Sedighi, M. & Hemmati-Sarapardeh, A. (2019). Book Chapter: Application of Nanofluids for Enhanced Oil Recovery: A Systematic Literature Review and Organizing Framework. Taylor & Francis, (CRC Press), United States.

6) Hashemizadeh, A., Mohammadi, M. & Akbari, M.R. (2013). Utilization of New Approaches in the Energy Management. Hakim Sabzevari University Press, Sabzevari, Iran (Translation to Persian).

7) Hashemizadeh, A., Mohammadi, M. & Sedighi, M. (2019). Transport Phenomena-Momentum Transport. Hakim Sabzevari University Press, Sabzevari, Iran (Translation to Persian).

8) Mohammadi, M., Sedighi, M. & Hashemizadeh, A. (2019). Transport Phenomena-Heat Transport. Hakim Sabzevari University Press, Sabzevari, Iran (Translation to Persian).

9) Sedighi, M., Hashemizadeh, A.& Mohammadi, M. (2019). Transport Phenomena-Mass Transport. Hakim Sabzevari University Press, Sabzevari, Iran (Translation to Persian).

10) Mohammadi, M., & Sedighi, M. (2016). Solutions Manual for Gas Dynamics of John and Keith. Aeej Press, Tehran, Iran. 

 

REVIEWER OF SCIENTIFIC JOURNALS


- Energy (Elsevier).

- Energy Conversion and Management (Elsevier).

- Energy & Fuel (ACS).

- Energy and Climate Change (Elsevier).

- Renewable and Sustainable Energy Reviews (Elsevier).

- Energy Economics (Elsevier).

- Applied Energy (Elsevier).

- Energy and AI (Elsevier).

- Renewable Energy (Elsevier).

- Journal of Cleaner Production (Elsevier).

- Energy Nexus (Elsevier).

- Journal of Petroleum Science and Engineering (Elsevier).

- Petroleum Research (Elsevier).

- Applied Thermal Engineering (Elsevier).

- Separation & Purification Reviews (Taylor & Francis)

- Fuel (Elsevier).

- Thermal Science and Engineering Progress (Elsevier).

- Journal of Natural Gas Science and Engineering (Elsevier).

- International Journal of Greenhouse Gas Control (Elsevier).

- Industrial and Chemical Engineering Research (ACS).

- Canadian Journal of Chemical Engineering (Wiley).

- Results in Engineering (Elsevier).

- Journal of Renewable and Sustainable Energy (AIP).

- Energy Reports (Elsevier).

- Asia-Pacific Journal of Chemical Engineering (Wiley).

 

COMPUTER SKILLS


- Expert in programming with MATLAB, Using MATLAB Toolboxes (Control System, Neural Network, Fuzzy Logic, Genetic Algorithm, Optimization, Model Predictive Control, Curve Fitting, PDE Tools, …).

-Aspen Plus,    -Aspen Pinch,     -PVsyst, PVSOL,    -EES,    -GIS,     -TRANSYS       - PIPEPHASE

- Microsoft Office (Excel, Word, Power Point, Visio).

- Familiar with Solid Works, Photoshop.

 

LANGUAGE SKILLS


Farsi: Native

English: Fluent